SMART WATER MONITORING SYSTEM


1) Temperature and Humidity Sensor(External Temp Sensor)


2) Rain water Sensor 

3) pH Sensor Kit
SEN-10972 

Features:
  • pH probe
    • pH Range: 0-14 (Na+ error at >12.3 pH)
    • Speed of Response: 95% in 1 second
    • Isopotential point: pH 7.00 (0 mV)
    • Offset: +/- 0.20 pH
  • 3 buffer solutions and storage solution
  • 38400 baud rate default
Documents:

or MinipH pH interface


4) Dissolved Oxygen  (Sensor for Arduino)


Full range dissolved oxygen readings from 0.01 to +35.99 mg/L
• Accurate dissolved oxygen readings down to the hundreds place (+/- 0.2)
• Temperature compensation
• Salinity compensation
• Pressure compensation
• Flexible calibration protocol supports one point or two calibration
• Calibration required only once per year with an Atlas Scientific™ Dissolved Oxygen probe
• Single reading or continuous reading modes
• Data format is ASCII




5) BMP180 High Precision Digital Barometric Pressure Sensor Board Module Arduino



  • Pressure range: 300~1100hPa (elevation 9000 m ~-500 m)    
  • Power supply voltage: 1.8V~3.6V (VDDA), 1.62V~3.6V (VDDD)    
  • LCC8 package: lead-free ceramic carrier package (LCC)    
  • Size: 3.6mmx3.8x0.93mm    
  • Low power consumption: 5 µA, in standard mode    
  • High accuracy: low-power mode, the resolution of 0.06hPa (0.5 m)    
  • High linearity mode, resolution of 0.03hPa (0.25 m)    
  • With temperature output    
  • I2C interface    
  • Temperature compensation    
  • Lead-free, in line with the RoHS standard    
  • MSL 1-response time: 7.5ms    
  • Standby current: 0.1 μA    
  • No external clock circuit    
  • INR 410/-rs


Design Of the Drome what I sketched 







Previous
Next Post »

Please Leave ur Valuable comments Here ConversionConversion EmoticonEmoticon

Facebook

HTML Comment Box is loading comments...

Visit my website